VNC is an excellent remote control tool. Elite CS series robots have the VNC server build in. The users can view or control the Teach Pendant Interface from PC with Ethernet cable connect to robot controller.
Download Link：VncViewer
Access Steps
1. Download and install the VNC Viewer that match with the PC OS.
2. User Ethernet cable to connect the robot controller FB1 with PC. Make sure robot and PC are under same network.
3. The VNC function of CS is enabled by default so no need to configure VNC in robot.
4. On VNC Viewer, click "File"-"New connection" on the left up corner.
5. Input the IP address of the CS Robot and press OK. No access password will be needed.
6. Double click the small window of the robot ip that we created.
7. Click “Continue”
8. We now enter the CS teach pendant window.
